See also:

Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. 1. Turn the “ENGINE START STOP” switch OFF. 2. Remove the engin ...

Steering wheel
The steering wheel can be adjusted to a comfortable position while the “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode. 1. Up. 2. Down. 3. Away from the driver. 4. Toward the dr ...

Items to initialize
The following items must be initialized for normal system operation in cases such as after the 12-volt battery is reconnected, or maintenance is performed on the vehicle. ...