Using the CD player

- Type A

- Type B


- Type B

- Type C


- Type C

Loading a CD


Loading a CD

Loading a CD

1. Press “WAIT” is shown on the display..


“WAIT” is shown on the display.

2. When the indicator on the slot turns from amber to green, insert a CD.

The display changes from “WAIT” to “LOAD”.

Loading multiple CDs

1. Press and hold a beep.until you hear
a beep.

“WAIT” is shown on the display.

2. When the indicator on the slot turns from amber to green, insert a CD.

The display changes from “WAIT” to “LOAD”.

The indicator on the slot turns to amber when the CD is being inserted.

3. When the indicator on the slot turns from amber to green, insert the next CD.

Repeat the procedure for the remaining CDs.

To cancel the operation, press you do not insert a disc within 15. If
you do not insert a disc within 15 seconds, loading will be canceled automatically.

Ejecting CDs

Ejecting a CD

1. To select the CD to be ejected,


1. To select the CD to be ejected, press on or
or on
.or
The selected disc number is shown.


The selected disc number is shown on the display.

2. Press Ejecting all the CDsand remove the CD.


Ejecting all the CDs

Press and hold beep, and then remove the CDs.until you hear a
beep, and then remove the CDs.

Selecting, fast-forwarding, reversing and scanning tracks

Selecting a track

Pressto move down using to move up or
until the to move down using
desired track number is displayed.until the
desired track number is displayed.

Fast-forwarding and reversing tracks

To fast-forward or reverse, press and hold onor
until on
you hear a beep.until
you hear a beep.

Scanning tracks

1. Press The first ten seconds of each track will be played..


The first ten seconds of each track will be played.

To cancel, press 2. Press the button again when the desired track is reached.again.


2. Press the button again when the desired track is reached.

Selecting a CD

Selecting a CD to play

To select the desired CD, press or  on
or or on
.or
Scanning loaded CDs.


Scanning loaded CDs

1. Press and hold a beep.until you hear
a beep.

The first ten seconds of the first track on each CD will be played.

To cancel, press 2. Press the button again when the desired CD is reached.again.


2. Press the button again when the desired CD is reached.

Playing and pausing tracks (type A and B)

To play or pause a track, press Random playback.


Random playback

Current CD

Press Songs are played in random order..


Songs are played in random order.

To cancel, press All CDsagain.


All CDs

Press and hold beep.until you hear a
beep.

Tracks on all loaded CDs are played in random order.

To cancel, press Repeat playagain.


Repeat play

Repeating a track

Press To cancel, press again..


To cancel, press Repeating all of the tracks on a CDagain.


Repeating all of the tracks on a CD

Press and hold beep.until you hear a
beep.

To cancel, press Switching the displayagain.


Switching the display

Press Each time the button is pressed, the display changes in the following order:.


Each time the button is pressed, the display changes in the following order: Elapsed time → CD title → Track title

CD player protection feature

To protect the internal components, playback is automatically stopped when a problem is detected.

Display

Up to 12 characters can be displayed at a time.

If there are 13 or more characters, pressing and holding beep enables to display the remaining characters.until you hear a
beep enables to display the remaining characters.

A maximum of 24 characters can be displayed.

If again or has not been operated for moreis pressed until you hear a beep
again or has not been operated for more than 6 seconds, the display will return to the first 12 characters.

Depending on the contents recorded, the characters may not be displayed properly or may not be displayed at all.

When “ERROR” or “WAIT” is shown on the display

“ERROR”: This indicates a trouble either in the CD or inside the player. The CD
may be dirty, damaged, or inserted up-side down.

“WAIT”: This indicates that operation is stopped due to a high temperature inside
the player. Wait for a while and then press be played back, contact your Lexus dealer.. If the CD still cannot
be played back, contact your Lexus dealer.

Discs that can be used

Discs with the marks shown below can be used.

Playback may not be possible depending on recording format or disc features, or due to scratches, dirt or deterioration.

CDs with copy-protection features may not be used.


CDs with copy-protection features may not be used.

Lens cleaners

Do not use lens cleaners. Doing so may damage the CD player.

If discs are left inside the CD player or in the ejected position for extended periods
of time

The discs may be damaged and may not play properly.

NOTICE:
CDs and adapters that cannot be used Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual Discs.

Doing so may damage the CD player and/or the CD load/eject function.

CDs that have a diameter that is not 4.7 in.


CDs that have a diameter that is not 4.7 in.

(12 cm)

Low-quality and deformed CDs


Low-quality and deformed CDs

CDs with a transparent or translucent


CDs with a transparent or translucent recording area

CDs that have had tape, stickers or CD-R


CDs that have had tape, stickers or CD-R labels attached to them, or that have had the label peeled off

NOTICE:
CD player precautions
Failure to follow the precautions below may result in serious damage to the CDs or
the player itself.

Do not insert anything other than CDs into the CD slot.

Do not apply oil to the CD player.

Store CDs away from direct sunlight.

Never try to disassemble any part of the CD player.

Do not insert more than one CD at a time.


Do not insert more than one CD at a time.

    See also:

    Steering wheel
    The steering wheel can be adjusted to a comfortable position. Operating the switch moves the steering wheel in the following directions: 1. Up. 2. Down. 3. Away from the driver. 4. Toward the d ...

    Opening the fuel tank cap
    Perform the following steps to open the fuel tank cap. Before refueling the vehicle Turn the “ENGINE START STOP” switch OFF and ensure that all the doors and windows are closed. Opening the fuel t ...

    Automatic High Beam
    The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off as ...