Headlight aim (vehicles with discharge headlights)
Vertical movement adjusting bolts

1. Adjustment bolt A.
2. Adjustment bolt B.
Before checking the headlight aim
1. Make sure the vehicle has a full tank of gas and the area around the headlight is not deformed.
2. Park the vehicle on level ground.
3. Sit in the driver’s seat.
4. Bounce the vehicle several times.
Adjusting the headlight aim
Remove the engine compartment cover.

Turn bolt A in either direction using a Phillips-head screwdriver.
Remember the turning direction and the number of turns in mind.

Turn bolt B the same number of turns and in the same direction as step 1 using a Phillips-head screwdriver.
If the error is over the value specified above, take the vehicle to your Lexus dealer to adjust the headlight aim.
See also:
Child restraint systems
A child restraint system for a small child or baby must itself be properly
restrained on the seat with the lap portion of the lap/shoulder belt.
The laws of the Canada and all 50 states of the USA n ...
Bluetooth® audio system setup
System setup items and operation procedures
Pattern A
To enter the menu for each function, follow the steps below using a
voice command or .
Pattern B
1. Press to select “BT•A MENU”.
2. Select “ ...
Safety
Packed with 10 airbags and the requisite safety features found in luxury cars
these days, the 2010 RX was named a Top Safety Pick by the Insurance Institute
for Highway Safety in 2009. For 2010, t ...
