Headlight cleaner switch
Washer fluid can be sprayed on the headlights.
Press the switch to clean the headlights.
The headlight cleaner can be operated when
The “POWER” switch is in ON mode and the headlight switch is turned on.
NOTICE:
When the washer fluid tank is empty
Do not press the switch continually as the washer fluid pump may overheat.
See also:
Items to initialize
The following items must be initialized for normal system operation in
cases
such as after the 12-volt battery is reconnected, or maintenance is performed
on the vehicle.
...
Intuitive parking assist
The distance to obstacles measured by the sensors is communicated via the multi-information display and a buzzer when parallel parking or maneuvering into a garage. Always check the surrounding area w ...
If the electronic key does not operate properly
If communication between the electronic key and vehicle is interrupted
or the electronic key cannot be used because the battery is
depleted, the smart access system with push-button start and wirele ...