Emergency flashers
Use the emergency flashers if the vehicle malfunctions or is involved in
an
accident.
Press the switch to flash all the turn signal lights. To turn them off, press the switch once again.
NOTICE:
To prevent 12-volt battery discharge
Do not leave the emergency flashers on longer than necessary when the hybrid
system
is not operating.
See also:
Emission inspection and maintenance (I/M) programs
Some states have vehicle emission inspection programs which include
OBD (On Board Diagnostics) checks. The OBD system monitors the operation
of the emission control system.
If the malfunction indic ...
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown.
If this happens, check and replace the fuses as necessary.
1. Turn the “POWER” switch off.
2. Remove the engine compartmen ...
If the electronic key does not operate properly
If communication between the electronic key and vehicle is interrupted
or the electronic key cannot be used because the battery is
depleted, smart access system with push-button start and wireless r ...