Hill-start assist control
Hill-start assist control helps to prevent the vehicle from rolling
when starting on an incline or slippery slope.
To engage hill-start assist control, further depress the brake pedal when the vehicle is stopped completely.
A buzzer will sound once to indicate the system is activated.
The slip indicator will also start flashing.
Hill-start assist control can be operated when
l The shift lever is in a position other than P.
The parking brake is not applied.
The accelerator pedal is not depressed.
Hill-start assist control
While hill-start assist control is operating, the brakes remain automatically applied after the driver releases the brake pedal. The stop lights and the high mounted stoplight turn on.
Hill-start assist control operates for about 2 seconds after the brake pedal
If the slip indicator does not flash and the buzzer does not sound when the
pedal is further depressed, slightly reduce the pressure on the brake pedal (do not allow the vehicle to roll backward) and then firmly depress it again. If the system
still does not operate, check if the operating conditions explained above have been met.
Hill-start assist control buzzer
When hill-start assist control is activated, the buzzer will sound once.
In the following situations, hill-start assist control will be canceled and
buzzer will sound twice.
• No attempt is made to drive the vehicle within approximately 2 seconds of releasing the brake pedal.
• The shift lever is moved to P.
• The parking brake is applied.
• The brake pedal is depressed again.
• The brake pedal has been depressed for more than approximately 3 minutes.
If the slip indicator comes on
It may indicate a malfunction in the system. Contact your Lexus dealer.
Hill-start assist control Do not overly rely on hill-start assist control. Hill-start assist control may not operate
effectively on extremely steep inclines or roads covered in ice.
Unlike the parking brake, hill-start assist control is not intended to hold
stationary for an extended period of time. Do not attempt to use hill-start assist control to hold the vehicle on an incline for an extended period of time, as
doing so may lead to an accident.
Wireless remote control
The wireless remote control can be used to lock and unlock the vehicle and the trunk from outside the vehicle. 1. Locks all doors. 2.Unlocks all doors. Pressing the button unlocks the driver’s ...
1. Seat position switch. 2. Seatback angle switch. 3. Seat cushion (front) angle switch. 4. Vertical height adjustment switch. 5. Lumbar support switch. 6. Seat leg support adjusting switch (dr ...
Indicators and warning lights
The indicator and warning lights on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems. Instrument cluster The units used on the speedometer ...