Head restraints
Head restraints are provided for all seats.
1. Up.
Pull the head restraints up.
2. Down.
Push the head restraint down while pressing the lock release button.
Removing the head restraints
Pull the head restraint up while pressing the lock release button.
Installing the head restraints
Align the head restraint with the installation holes and push it down to the lock position.
Press and hold the lock release button when lowering the head restraint.
Adjusting the height of the head restraints (front seats)
Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
Adjusting the rear seat head restraints
Always raise the head restraints to the uppermost lock position during use.
CAUTION:
Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to do
so
may result in death or serious injury.
Use the head restraints designed for each respective seat.
Adjust the head restraints to the correct position at all times.
After adjusting the head restraints, push down on them and make sure they are locked in position.
Do not drive with the head restraints removed.
See also:
If your vehicle overheats
If your engine overheats:
1. Stop the vehicle in a safe place and turn off the automatic air
conditioning system.
2. Check to see if steam is coming out from under the hood.
If you see steam:
Sto ...
Handling, Braking & Ride Quality
If the CT stumbles in acceleration, it shines in handling. The steering wheel
turns with a light touch at low speeds in Eco and Normal mode, but it wanders
too much on the highway. Sport mode dial ...
SRS airbags
The SRS airbags inflate when the vehicle is subjected to certain types of
severe impacts that may cause significant injury to the occupants. They
work together with the seat belts to help reduce the ...