Fuel pump shut off system
To minimize the risk of fuel leakage when the engine stalls or an airbag inflates upon collision, the fuel pump shut off system stops supplying fuel to the engine.
Follow the procedure below to restart the engine after the system is activated.
1. Turn the “ENGINE START STOP” switch to ACCESSORY mode or OFF.
2. Restart the engine.
NOTICE:
Before starting the engine
Inspect the ground under the vehicle.
If you find that fuel has leaked on to the ground, the fuel system has been
damaged
and is in need of repair. Do not restart the engine.
See also:
Thrust vs. Thrift
Thanks to the drivetrain's immediate thrust, the CT 200h has adequate oomph
for driving solo: It scoots from a stoplight well enough and maintains highway
speeds with little trouble. But it lacks ...
Power (ignition) switch
Performing the following operations when carrying the electronic key on
your person starts the hybrid system or changes “POWER” switch modes.
Starting the hybrid system
1. Check that the parking br ...
Driving position memory
Your preferred driving position (the position of the driver's seat,
steering
wheel and outside rear view mirrors) can be memorized and recalled with
the touch of a button. It is also possible to s ...