The wireless remote control can be used to lock and unlock the vehicle.

It also opens and closes the back door.

- Vehicles without a power back door.

1. Locks all the doors.

2. Unlocks all the doors.

Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds
unlocks the other doors.

3. Opens the windows and moon roof (press and hold)*.

4. Sounds the alarm
(press and hold).

*: This setting must be customized at your Lexus dealer.

- Vehicles with a power back door.

1. Locks all the doors.

2. Unlocks all the doors.

Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds
unlocks the other doors.

3. Opens the windows and moon roof (press and hold)*.

4. Opens and closes the back door (press and hold).

5. Sounds the alarm
(press and hold).

*: This setting must be customized at your Lexus dealer.

Operation signals

Side doors: A buzzer sounds and the emergency flashers flash to indicate that the
doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Back door: A buzzer sounds and the emergency flashers flash twice to indicate that the back door is opening/closing.

Windows and moon roof: A buzzer sounds to indicate that the windows and moon roof are opening.

Door lock buzzer

If an attempt to lock the doors is made when a door is not fully closed, a buzzer
sounds continuously. Fully close the door to stop the buzzer, and lock the vehicle
once more.

Panic mode

When is pressed for longer than
about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle.

To stop the alarm, press any button on the electronic key.

Back door operation

The back door can be opened even if it is locked. Lock the back door again when
you leave the vehicle. The back door will not lock automatically after it has been
opened and then closed.

Alarm

Using the wireless remote control to lock the doors will set the alarm system.

Reversing the operation of the power back door

Pressing the wireless remote control switch again while the power back door is
operating will cause the operation to reverse.

If the wireless remote control does not operate properly

Locking and unlocking the doors: Use the mechanical key.

Customization

Settings (e.g. door unlocking function) can be changed.

Certification for wireless remote control

This system meets the certification requirements of Radio Law.

- For vehicles sold in the U.S.A.

FCC ID: NI4TMLF8-6.

FCC ID: HYQ13CZF.

FCC ID: HYQ14ACX.

FCC ID: HYQ14AEB.

NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.

FCC WARNING:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

For vehicles sold in Canada.

NOTE:
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.