Emission inspection and maintenance (I/M) programs

Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system monitors the operation of the emission control system.

If the malfunction indicator lamp comes on

The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Lexus dealer to service the vehicle.

Your vehicle may not pass the I/M test:

When the battery is disconnected or discharged Readiness codes that are set during ordinary driving are erased.

Also, depending on your driving habits, the readiness codes may not be completely set.

- When the fuel tank cap is loose The malfunction indicator lamp comes on as a temporary malfunction and your vehicle may not pass the I/M test.

When the malfunction indicator lamp goes off after several driving trips

The error code in the OBD system will not be cleared unless the vehicle is driven 40 or more times.

If your vehicle does not pass the I/M test

Contact your Lexus dealer to prepare the vehicle for re-testing.

    See also:

    Operating an iPod® player
    Connecting an iPod® player enables you to enjoy music from the vehicle speakers.   Connecting an iPod® player     Slide the armrest while pulling up the lever, and lift t ...

    Drive Mode Select Switch
    Supplementing the NORMAL drive mode of new Lexus, three 'ondemand' drive modes may be selected via the Drive Mode Select switch, adapting the Lexus CT 200h to either a Dynamic or Relaxing driving ...

    Fog light switch
    The fog lights improve visibility in difficult driving conditions, such as in rain and fog. - U.S.A. 1. Turns the front fog lights off. 2. Turns the front fog lights on. - Canada 1. Turn ...