Head restraints
Head restraints are provided for all seats.
1. Up.
Pull the head restraints up.
2. Down.
Push the head restraint down while pressing the lock release button.
Removing the head restraints
Pull the head restraint up while pressing the lock release button.
Installing the head restraints
Align the head restraint with the installation holes and push it down to the lock position.
Press and hold the lock release button when lowering the head restraint.
Adjusting the height of the head restraints
Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
Adjusting the rear seat head restraints
Always raise the head restraint one level from the stowed position when using.
CAUTION:
Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to do
so
may result in death or serious injury.
- Use the head restraints designed for each respective seat.
- Adjust the head restraints to the correct position at all times.
- After adjusting the head restraints, push down on them and make sure they are locked in position.
- Do not drive with the head restraints removed.
See also:
If the vehicle becomes stuck
Carry out the following procedures if the tires spin or the vehicle
becomes
stuck in mud, dirt, or snow.
Stop the engine. Set the parking brake and put the shift lever in P.
- Remove the mud, sno ...
Cargo
One winning attribute for the RX is its spacious cargo area. At 40 cubic feet
with the rear seats up and 80.3 cubic feet with them folded, you'll be
hard-pressed to find another two-row crossover ...
Optimal use of the audio system
- Type A and B
1. Displays the current mode.
2. Changes the following settings:
• Sound quality and volume
balance.
The sound quality and balance
setting can be changed to produce
the best so ...